Product ID:ROSIN CORE SOLDER
MSDS Date:09/01/1986
FSC:3439
NIIN:00-006-7764
MSDS Number: BHYBV

BOW SOLDER PRODUCTS CO INC

900 HOBSON ST
UNION, NJ 07083
US

Emergency Phone: 800-526-4496

Info Phone: 800-526-4496

Cage: 52329

BOW ELECTRONIC SOLDERS

SAYREVILLE, NJ 08872 US

Telephone: 732-316-2177

Cage: 52329

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 63%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 37%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ROSIN ACID (PART OF FLUX. FLUX CORE CONSTITUTES 3% OF

CAS: 8050-09-7

DIPROPYLENE GLYCOL (PART OF FLUX CORE)

CAS: 110-98-5

RTECS: UB8785000

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PRODUCT PRODUCES THERMAL BURNS ON
CONTACT DURING THE SOLDERING OPERATION. INHALING FLUX FUMES MAY
CAUSE PULMONARY EDEMA. CHRONIC INHALATION OF THE METAL FUMES
ASSOCIATED WITH SOLDERING MAY CAUSE LEA D POISONING.
Explanation of Carcinogenicity:LEAD AND SOME LEAD COMPOUNDS ARE LISTED.
SEE INDIVIDUAL REPORTS FOR DETAILS.
Effects of Overexposure:EYE:IRRITATION,THERMAL BURNS. SKIN:THERMAL
BURNS. INHALED:RESPIRATORY IRRITATION, PULMONARY EDEMA.
LEADPOISONING. INGESTED:LEAD POISONING.
Medical Cond Aggravated by Exposure:PEOPLE WITH LEAD OVEREXPOSURE MAY
BE AT INCREASED RISK.

First Aid:EYE:FLUSH W/WATER 15 MIN. SKIN:NORMAL FIRST AID FOR THERMAL
BURNS. INHALED:REMOVE TO FRESH AIR. INGESTED:AN UNLIKELY
EXPOSURE. IF INGESTION OCCURS, GET IMMEDIATE MEDICAL CARE. MONITOR
BLOOD LEAD CO NTENT.

Flash Point:N1-N1
Extinguishing Media:PRODUCT IS NON FLAMMABLE. EXTINGUISH FIRE WITH
MEDIA APPROPRIATE FOR SOURCE OF FIRE.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS;LEAD OXIDE FUME.

Spill Release Procedures:ALLOW TO COOL AND PICK OR SWEEP UP. AVOID
CAUSING DUST
Neutralizing Agent:NONE

Handling and Storage Precautions:NONE
Other Precautions:SEE "SAFETY IN SOLDERING" BY LEAD INDUSTRIES ASSOC.
292 MADISON AVE NEW YORK,NY 10017.

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR FOR METAL/METAL OXIDE FUME IF PEL/TLV IS EXCEEDED.
Ventilation:USE LOCAL EXHAUST TO KEEP EXPOSURES BELOW PEL/TLV
Protective Gloves:TO PROTECT FROM THERMAL BURNS
Eye Protection:SAFETY GLASSES OR SPLASH GOGGLES
Other Protective Equipment:AS NEEDED TO PROTECT FROM THERMAL BURNS.
Work Hygienic Practices:USE GOOD CHEMICAL HYGIENE PRACTICES. AVOID ANY
POSSIBILITY OF INGESTION OR INHALATION OF LEAD FUMES.
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:>1700F
Decomp Temp:Decomp Text:UNKNOWNUNKN
Spec Gravity:SOLID
Solubility in Water:NEGLIGIBLE
Appearance and Odor:METALLIC COLORED WIRE, ALMOST NO ODOR
Percent Volatiles by Volume:11-13

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES, OXIDIZERS. KEEP MOLTEN METAL AWAY FROM WATER.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:METAL FUMES, ESPECIALLY LEAD

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.
RECOVER METAL IF POSSIBLE, OR LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.